Product Data


Product Data


Jeva Design, SET is an artisan plaster. It’s an acrylic and cement base plaster developed to produce a decorative coating of walls. It provides an economical tough surface that is flexible, which can be colored and finished in a wide range of textures to adorn any architectural style.

Our plasterwork is created by first custom tinting and then hand applied by troweling in consecutive layers. The base layer is applied as a thin skim coat and troweled until the desired texture is achieved. Each layer is critical to the look and feel of the finished work. Our protective coating is our final layer to insure minimal maintenance.

Wall Care

Jeva Design, SET is a decorative cementitious plaster that needs minimal care. Our artisan plaster is protected by a sealer that dries to a durable, water resistant material. 

Care instructions: 

Dampen a soft cloth with warm water, and apply a dab of mild liquid dish detergent in the center. Buff the soapy cloth over any spots of dirt or minor stains to remove them. Remove soap residue with another damp cloth if necessary. Dry the clean area with a different soft cloth. 

For tougher stains use a nonabrasive all-purpose cleaner diluted 50% with warm water. Dampen a soft cloth with the diluted nonabrasive cleaner and buff over the stains to remove them. Remove cleaner residue with another damp cloth if necessary. Dry the clean area with a different soft cloth. 

Unless otherwise instructed do NOT use bleach, cleaners containing bleach, or scouring pads on SET walls. 

Specialty finishes: 

To maintain, it is recommended that touch-ups are made by Jeva Design installers.


Jeva Design warrants SET, the decorative cementitious plaster system against manufacturing for a period of one year by from the date of application when applied to a wall surface. This warranty only applies in instances where the products have been professionally installed by Jeva Design. Jeva Design limited and exclusive warranty is not transferable to subsequent purchasers and/or owners of the product.

Manufacturing defect is defined to be a failure of the coating system to adhere to a wall surface when applied according to manufacturer’s instructions, and does not include subsequent failure or damage caused by exogenous factors such as substrate failure or defect, sharp objects, persons, or environmental conditions. This limited warranty is the sole and exclusive warranty given by Jeva Design, with respect to this product. In no event shall Jeva Design liability exceed the purchase price and/ or invoiced value of the product. 

This limited warranty does not cover and expressly excludes any damage, loss, cost, defect, or deficiency arising out of or relating to: (a) accident, abuse, misuse, or vandalism; (b) mold and mildew; (c) use of incompatible materials, as sorties, or supplies; (d) chemicals, improper cleaning or maintenance; (e) unreasonable use; (f) abnormal conditions of use including use on walls subject to moisture infiltration or accumulation; (g) design, installation, or construction defects and/ or deficiencies of any kind or nature; (h) fire, flood, or other acts, omissions, causes, or events beyond the control of Jeva Design; or (i) plaster that has been altered by anyone other than Jeva Design; or (j) any other loss, cost, damage, defect, or deficiency not within the scope of this limited and exclusive warranty.

All claims for defects hereunder must be presented to Jeva Design, in writing, within thirty (30) days after buyer discovers and/or should have discovered the alleged defect(s). Jeva Design shall then be provided a reasonable opportunity to examine the allegedly nonconforming product and verify any such defect before determining further actions. Failure of buyer to comply with these notice provisions shall constitution a wavier of buyer by all claims in retrospective thereto.